PC World Philippines

Posts Tagged ‘ photo ’

Four Easy Tricks for Better Photos

By Fei on March 22, 2012

By Dave Johnson
March 22, 2012

SAN FRANCISCO – There are about a million books about photography on the shelf of your local bookstore. I should know, because mine is one of them. But you don’t need to remember a book’s worth of tips and tricks to improve your photography; for the highlights, you might want to play with anonline camera simulator. And when you get right down to it, there are just a handful of easy things you can do to make a dramatic improvement to your photos.

1. Remember the Rule of Thirds

Want to improve your photographic composition? Stop putting your subject in the center of the frame. The “rule of thirds” tells us that photos (and video–watch TV and movies for proof) look better when the subject is off-center, aligned about a third of the way from the right or left side. Here, you can see that the wolf’s face is positioned on the line of thirds on the right side of the photo, and his eyes are almost exactly a third of the way from the top as well.

There are actually a slew of rules that can help you compose eye-catching and engaging photos, but this one rule is perhaps the single most important one. To be precise, draw two lines through a photo, dividing it into nine squares that looks something like a tic-tac-toe board. The rule of thirds says that the most visually interesting parts are along any one of the lines, or at any of the points at which the lines intersect. That gives you a lot of ways to arrange your subject, so experiment.
2. Minimize Your Depth of Field

This is one of those rules that begs to be broken (try some hyperfocal photography, for example), but if you’re just starting out, you’ll get some great results by following it to the letter, at least to start with. Shoot your photos so the subject is sharply in focus, but the depth of field is shallow enough that the background is blurry. This creates visual separation and emphasizes the importance of your subject. It also looks really cool.
Depth of field is a measure of how much of the picture is in sharp focus, and you control that with your camera’s aperture setting. A small f/number will give you a relatively small depth of field–you can dial in a small f-number directly in Aperture Priority mode, or you can set your camera to a scene setting like Portrait mode, which will do the same thing.

3. Use a Fast Shutter to Get a Sharp Photo

One of the easiest ways to ruin a photo is by shooting with a shutter speed that’s too slow, so you get dreaded camera shake. The antidote is pretty simple: Shoot with a faster shutter speed. But how fast is fast enough? There’s actually a handy rule of thumb that has served photographers for 75 years: The shutter speed should be no slower than the inverse of the lens’s focal length.

What?

That’s not as complicated as it might sound. Suppose you are shooting with a camera that has a 50mm lens. You can safely capture a sharp photo if the shutter speed is 1/50 second or faster. If you have a 200mm lens, the shutter speed should be 1/200 second or faster. And remember that for this guideline to work, you should refer to the lens’s “35mm equivalent” focal length.

4. Eliminate Red Eye by Avoiding the Flash

Do you get a lot of red-eyed people in your photos? That happens when the light from your flash reflects off the retina in the back of your subject’s eyes, giving them that tell-tale demonic glow.

Now that you know why it happens, you can avoid it. You can avoid shooting in dark situations, you can turn off your flash and rely on ambient light. Increase your camera’s ISO to make the most of the available light. Or (if you have a digital SLR), you can mount an external flash on a bracket to get it further from the lens. Read more about this in “Avoid the Red Eye Effect.”

Five Tips for Better Photo Printing

By Fei on November 17, 2009

By Dave Johnson
November 17, 2009

By Dave Johnson

PC World (US)

SAN FRANCISC – Suppose you have just taken an award-winning photo with perfect composition, great exposure, and a Pulitzer Prize-worthy subject. Or, at the very least, you’ve managed to avoid the five most common photo mistakes, and you want to hang the result in the living room.
In the old days, photo printing was left to the professionals who developed our film. These days, though, we often print our digital photos at home, on our own equipment. All our hard work is for naught if we don’t take care during the printing process. That means we have to master the art of photo printing.

This week, I’ve got five tips to help you get better results from your inkjet photo printer.

1. Choose the Right Print Size

Computers are obedient machines: You can tell your PC to print a photo at any size and it’ll comply. That doesn’t mean the results will be any good, though. You need enough pixels in your image file for the printed-out photo to be sharp at the desired print size. There are a lot of factors that go into print quality, but it’s safe to say that you need at least 200 dots per inch (dpi) for acceptable image quality, and at least 300 dpi for excellent print quality. But what does that mean, and how can you figure out the best print size for a particular photo?

You can ignore any properties in your photo editing program that report a particular dpi value or recommend a particular print size; that’s hogwash. Instead, just do this: Determine the maximum recommended print size by dividing the photo’s pixel size by 200 (or 300 for higher-quality prints).

Not sure how many pixels are in your photo? Right-click the image file’s icon, choose Properties, and click the Details tab. You should see the width and height listed in pixels. (Or, if you are using Windows Vista or Windows 7, you can just click a photo’s icon and look for the information in the details pane at the bottom of the folder.)

Suppose your photo measures 2000 by 3400 pixels. Divide each dimension by 200, and you get 10 by 17. That means you could print the photo as large as 10 by 17 inches and get acceptable results. If you want a higher-quality printout, divide the pixel size by 300. That gives you 6 by 11, which means you should print it no larger than about 5 by 7 inches for the best results.

Of course, this is approximate; a lot of other factors affect photo quality. This technique, however, gives you a good rule of thumb for deciding whether a photo will print well.

2. Choose the Right Paper

You can get some stunning photos from modern inkjet printers, but not just any paper will do. Plain paper, for example, absorbs the ink. This washes out the colors and destroys fine detail, reducing the print’s overall sharpness. It’s fine for text, and you can use it to print drafts of your digital images. For best results, use the printer manufacturer’s recommended photo paper.

Of course, you’re still not out of the woods. Photo paper comes in a variety of formats. The most common varieties are glossy and semi-glossy (also called matte). Glossy is exactly what it sounds like: It’s shiny and gives your photos a resounding visual punch. Glossy paper is very reflective, though, and it can generate glare in direct sunlight. It also smudges easily. If you want a less reflective, less smudgy alternative, consider matte. It’s not quite as sharp as glossy paper, and fine detail can get lost in the surface–but, personally, I like the freckled finish of matte paper.

3. Stick With the Manufacturer’s Ink

I might not win any popularity contests by saying this, but I highly recommend using the ink recommended (and sold) by your printer’s manufacturer.

Printers aren’t stand-alone gadgets that work with any fluid you pour into them, like oil in a car engine. They’re engineered to work best with specific ink formulations, and using “remanufactured” or refilled ink cartridges will result in lower-quality prints. This can be especially obvious when you’re printing photos.

4. Verify the Print Settings

When you’re ready to print a photo, double-check all the important settings. You might think that’s obvious, but you’d be surprised how often you get lousy prints because some of these settings are loopy.

Is the paper loaded correctly? Photo paper is designed to be printed on a particular side. If you print on the wrong side, the ink won’t absorb properly, and your photo won’t look good.

Did you set the right paper type and ink type in the print settings dialog? Be sure those settings match the specs on the box. It’s not so bad if you configure the printer for premium paper and quality ink when printing on plain paper, but you definitely don’t want the printer to think you’re using plain paper or draft settings when outputting to high-quality photo paper.

5. Maintain Your Printer

Take good care of your printer. Inkjet printers have finicky print nozzles that occasionally clog and need to be cleaned. Every month or two, it’s a good idea to run your printer’s print head cleaning and print head alignment utilities (usually available from the printer options in the Windows Control Panel). And you shouldn’t let your printer go unused for weeks at a time. Even if you have a printer that’s intended just for photos, I highly recommend printing on it at least once a week whether you need to or not. That keeps the nozzles from gumming up, which can spell disaster.

Hot Pic of the Week

Get published, get famous! Each week, we select our favorite reader-submitted photo based on creativity, originality, and technique.